A
-
Abbasi, Zahra
Comparing the effect of modification with different silane compounds on the chemical structure and physical properties of poplar wood [Volume 10, Issue 2, 2019, Pages 223-235]
-
Abdolkhani, Ali
Using of xylanase and cold caustic extraction to remove hemicellulose from bagasse bleached pulp for dissolving pulp production [Volume 10, Issue 1, 2019, Pages 1-9]
-
Abdolkhani, Ali
Synthesizing and Producing of Low Sensitive Nitrocellulose with Acetylation Method [Volume 10, Issue 2, 2019, Pages 175-187]
-
Abdolkhani, Ali
Extraction of lignin with lignoboost process and production of water-soluble sulfonated derivatives from lignin of bagasse soda black liquor [Volume 10, Issue 2, 2019, Pages 237-247]
-
Abdolkhani, Ali
Investigation on pulp production using γ-valerolactone organosolv process from birch wood [Volume 10, Issue 3, 2019, Pages 429-443]
-
Abdolkhani, Ali
Chemical treatment of Bagasse by oxalic acid-choline chloride and lactic acid-choline chloride deep eutectic solvents [Volume 10, Issue 4, 2020, Pages 559-573]
-
Abedini, Raoufeh
Comparing the effect of modification with different silane compounds on the chemical structure and physical properties of poplar wood [Volume 10, Issue 2, 2019, Pages 223-235]
-
Adeli, Kamran
Competition, Monopoly and Concentration in Wood Pulp and Recovered Paper Import Market of Iran [Volume 10, Issue 1, 2019, Pages 101-113]
-
Adeli, Kamran
Investigating the status of wood and its products Intra-industry trade in Iran [Volume 10, Issue 1, 2019, Pages 125-141]
-
Afra, Elyas
Application of nano-titanium dioxide in the manufacture of Photocatalyst Securities Paper by controlled hydrolysis method [Volume 10, Issue 1, 2019, Pages 21-34]
-
Aghakhani, Mohammad
The impact of different factors on particles quality and energy consumption in knife ring flaker [Volume 10, Issue 2, 2019, Pages 205-215]
-
Ahmadi, Mohammad
Evaluation of the pulp properties produced from rice straw by monoethanolamine and potassium sulfite combined processes [Volume 10, Issue 1, 2019, Pages 77-87]
-
Ahmadi Ladjimi, Ali
Effect of cationic polyDADMAC-based fixing agent on strength properties of OCC pulp [Volume 10, Issue 4, 2020, Pages 605-616]
-
Akbarnejad, Mehnaz
Improving Weathering Performance of Beech Wood Coated with Acrylic Paint by nano zinc oxide and nano cellulose [Volume 10, Issue 2, 2019, Pages 311-321]
-
Amininasab, Seyed Mojtaba
Comparing the effect of modification with different silane compounds on the chemical structure and physical properties of poplar wood [Volume 10, Issue 2, 2019, Pages 223-235]
-
Arjmand Kahagh, Sajjad
The effect of residual xylan on cellulose nanofiber production through electrospinning of wheat straw [Volume 10, Issue 4, 2020, Pages 543-558]
-
Aryaie Monfared, Mohammad Hadi
Investigate of Biometric andChemical Properties of Ammodendron persicum Fibers (Case Study; Zirkouh area - Qaenat City, South Khorasan, Iran) [Volume 10, Issue 1, 2019, Pages 49-62]
-
Asadpour, Ghasem
Effect of the addition of bagasse and imported long fiber chemical pulps on the properties of chemical-mechanical pulp produced from hornbeam, beech and poplar mixture [Volume 10, Issue 1, 2019, Pages 143-152]
-
Ashori, Alireza
The Effect of Concentration of Modified Cellulose NanoFibers by phthalimide on the Adsorption Rate of Carbon Dioxide (CO2) [Volume 10, Issue 3, 2019, Pages 397-406]
-
Azadfallah, Mohammad
Effect of cationic polyDADMAC-based fixing agent on strength properties of OCC pulp [Volume 10, Issue 4, 2020, Pages 605-616]
-
Azizi, Majid
The model of multiple criteria decision making to determine the optimal product and identify target markets based on poplar, alder and loblolly-pine [Volume 10, Issue 2, 2019, Pages 189-203]
-
Azizi Mossello, Ahmad
The Effect of Protexin Enzyme for Bagasse Storage on Pulp and Paper Properties [Volume 10, Issue 3, 2019, Pages 457-468]
B
-
Badehian, Z
Comparing the economic value of market function and unmarket function of some populus species [Volume 10, Issue 2, 2019, Pages 217-222]
-
Behrooz, Rabi
The effect of kaolinite on the properties of lignocellulose superabsorbent from old corrugated container fiber fines [Volume 10, Issue 4, 2020, Pages 531-542]
C
-
Crestini, Claudia
Identification and Evaluation of characteristics of Fractions of Industrial Softwood Kraft Lignin Separated by Single Step Fractionation [Volume 10, Issue 2, 2019, Pages 297-309]
D
-
Dastoorian, Foroogh
Effect of press closing speed on stress relaxation and set recovery of densified alder wood [Volume 10, Issue 4, 2020, Pages 469-477]
-
Dehghan, Moein
Effect of poly lactic acid on physical and mechanical properties of wood plastic composite [Volume 10, Issue 2, 2019, Pages 261-272]
-
Dehghani Firoozabadi, Mohammadreza
Evaluation and comparision of mechanical and barrier properties of stone paper and gloss paper [Volume 10, Issue 3, 2019, Pages 373-384]
-
Dehghani Firouzabadi, Mohammadreza
Effect of calendering on physical and mechanical properties of coated papers [Volume 10, Issue 2, 2019, Pages 273-285]
-
Dehghani Firouzabadi, M.R
Evaluation of the starch films containing cellulose and lignocellulose for food packaging [Volume 10, Issue 1, 2019, Pages 35-47]
-
Djafari Petroudy, Seyed Rahman
The effect of residual xylan on cellulose nanofiber production through electrospinning of wheat straw [Volume 10, Issue 4, 2020, Pages 543-558]
-
Doosthoseini, Kazem
Fabrication of Bilayer Nanocellulosic Aerogel Scaffold and Evaluation of Its Properties for Skin Tissue engineering [Volume 10, Issue 2, 2019, Pages 287-296]
E
-
Ebrahimi, Ghanbar
Investigating the stress carrying capacity of miter corner joints made with biscuit under diagonal tension and compression loading [Volume 10, Issue 3, 2019, Pages 323-336]
-
Ebrahimi Majdar, Reza
Identification and Evaluation of characteristics of Fractions of Industrial Softwood Kraft Lignin Separated by Single Step Fractionation [Volume 10, Issue 2, 2019, Pages 297-309]
-
Efhamisisi, davod
The evalaution of decay resistance and dimentional stability of poplar wood treated with Styrene/Nano wellastonite [Volume 10, Issue 3, 2019, Pages 445-455]
G
-
Ghaffari, Manssor
Evaluation of the starch films containing cellulose and lignocellulose for food packaging [Volume 10, Issue 1, 2019, Pages 35-47]
-
Ghaffari, Manssor
The investigation of the spraying of cellulose nanofibers (CNF) and Nano chitosan on the properties writing & printing (W&P) Paper [Volume 10, Issue 2, 2019, Pages 249-260]
-
Ghaffari, Reza
Effect of press closing speed on stress relaxation and set recovery of densified alder wood [Volume 10, Issue 4, 2020, Pages 469-477]
-
Ghasemian, Ali
The investigation of the spraying of cellulose nanofibers (CNF) and Nano chitosan on the properties writing & printing (W&P) Paper [Volume 10, Issue 2, 2019, Pages 249-260]
-
Ghasemian, Ali
Identification and Evaluation of characteristics of Fractions of Industrial Softwood Kraft Lignin Separated by Single Step Fractionation [Volume 10, Issue 2, 2019, Pages 297-309]
-
Ghasemian, Ali
The product of pulp from hornbeam with alkaline sulfite- AQ process [Volume 10, Issue 4, 2020, Pages 479-494]
-
Gholamiyan, Hadi
Investigating the changes in the surface quality of common species in furniture industry using chemical vapors [Volume 10, Issue 1, 2019, Pages 63-75]
-
Gholamiyan, Hadi
The possibility of designing and constructing standard tables and chairs with palm trunk [Volume 10, Issue 4, 2020, Pages 575-587]
H
-
Hamzeh, Yahya
The influence of hot water pre-extraction of wheat straw hemicelluloses on monoethanolamine-AQ and soda-AQ pulp properties [Volume 10, Issue 3, 2019, Pages 361-372]
-
Hamzeh, Yahya
Chemical treatment of Bagasse by oxalic acid-choline chloride and lactic acid-choline chloride deep eutectic solvents [Volume 10, Issue 4, 2020, Pages 559-573]
-
Hamzeh, Yahya
Effect of cationic polyDADMAC-based fixing agent on strength properties of OCC pulp [Volume 10, Issue 4, 2020, Pages 605-616]
-
Hamzezadeh, Roghaye
The evalaution of decay resistance and dimentional stability of poplar wood treated with Styrene/Nano wellastonite [Volume 10, Issue 3, 2019, Pages 445-455]
-
Hejazi, Sahab
Evaluation of the pulp properties produced from rice straw by monoethanolamine and potassium sulfite combined processes [Volume 10, Issue 1, 2019, Pages 77-87]
-
Hosseini, S. Behnam
The model of multiple criteria decision making to determine the optimal product and identify target markets based on poplar, alder and loblolly-pine [Volume 10, Issue 2, 2019, Pages 189-203]
-
Hosseini, Seyed Behnam
The effect of the presence of skin on the mechanical properties of milkweed wood flour-plastic composite [Volume 10, Issue 1, 2019, Pages 115-124]
I
-
Ismaeilimoghadam, Saeed
Effects of cellulose nano crystal addition on the properties of polyhydroxybutyrate-co-valerate (PHBV) films [Volume 10, Issue 1, 2019, Pages 153-164]
-
Izadyar, Soheila
The evalaution of decay resistance and dimentional stability of poplar wood treated with Styrene/Nano wellastonite [Volume 10, Issue 3, 2019, Pages 445-455]
-
Izee, seddigheh
Fabrication and properties evaluation of three layered transparent nanocomposite reinforced with cellulose and chitin nanofibers [Volume 10, Issue 4, 2020, Pages 495-505]
J
-
Jalali Torshizi, Hossein
Effect of alum-dispersed rosin system on water absorption, strength and optical properties of papers made from recycled fibers [Volume 10, Issue 3, 2019, Pages 385-395]
-
Jalali Torshizi, Hossein
Comparative study on natural cellulosic and synthesized aramid fibers on mechanical properties of epoxy composite [Volume 10, Issue 3, 2019, Pages 417-427]
-
Jonoobi, Mehdi
Fabrication of Bilayer Nanocellulosic Aerogel Scaffold and Evaluation of Its Properties for Skin Tissue engineering [Volume 10, Issue 2, 2019, Pages 287-296]
-
Jonoobi, Mehdi
The Effect of Concentration of Modified Cellulose NanoFibers by phthalimide on the Adsorption Rate of Carbon Dioxide (CO2) [Volume 10, Issue 3, 2019, Pages 397-406]
K
-
Kahvand, Mohammad
Investigating the stress carrying capacity of miter corner joints made with biscuit under diagonal tension and compression loading [Volume 10, Issue 3, 2019, Pages 323-336]
-
Kalagar, Mehdi
The model of multiple criteria decision making to determine the optimal product and identify target markets based on poplar, alder and loblolly-pine [Volume 10, Issue 2, 2019, Pages 189-203]
-
Karimi Mazraeshahi, Alinaghi
The evalaution of decay resistance and dimentional stability of poplar wood treated with Styrene/Nano wellastonite [Volume 10, Issue 3, 2019, Pages 445-455]
-
Khalili, Ali
Synthesizing and Producing of Low Sensitive Nitrocellulose with Acetylation Method [Volume 10, Issue 2, 2019, Pages 175-187]
-
Khazaian, Abolghasem
The impact of different factors on particles quality and energy consumption in knife ring flaker [Volume 10, Issue 2, 2019, Pages 205-215]
-
Khosravani, amir
The effect of kaolinite on the properties of lignocellulose superabsorbent from old corrugated container fiber fines [Volume 10, Issue 4, 2020, Pages 531-542]
-
Kolaei Moakher, Fatemeh
Evaluation and comparision of mechanical and barrier properties of stone paper and gloss paper [Volume 10, Issue 3, 2019, Pages 373-384]
-
Koosha, Mojtaba
Comparative study on natural cellulosic and synthesized aramid fibers on mechanical properties of epoxy composite [Volume 10, Issue 3, 2019, Pages 417-427]
L
-
Lange, Heiko
Identification and Evaluation of characteristics of Fractions of Industrial Softwood Kraft Lignin Separated by Single Step Fractionation [Volume 10, Issue 2, 2019, Pages 297-309]
M
-
Mahdavi, saeid
Comparison of non-woody biomass properties for energy generation [Volume 10, Issue 4, 2020, Pages 617-628]
-
Mashkour, Mahdi
Improving Weathering Performance of Beech Wood Coated with Acrylic Paint by nano zinc oxide and nano cellulose [Volume 10, Issue 2, 2019, Pages 311-321]
-
Mohammadiamirabad, Leila
Fabrication of Bilayer Nanocellulosic Aerogel Scaffold and Evaluation of Its Properties for Skin Tissue engineering [Volume 10, Issue 2, 2019, Pages 287-296]
-
Mohammadi limaei, Soleiman
Comparison Study in the Clear Wood Estimation of the Beech tree trunk(Fagus orientalis Libsky) [Volume 10, Issue 1, 2019, Pages 11-19]
-
Mohammadi limaei, Soleiman
Competition, Monopoly and Concentration in Wood Pulp and Recovered Paper Import Market of Iran [Volume 10, Issue 1, 2019, Pages 101-113]
-
Mohammadkazemi, Faranak
Comparative study on natural cellulosic and synthesized aramid fibers on mechanical properties of epoxy composite [Volume 10, Issue 3, 2019, Pages 417-427]
-
Moradian Gilan, Kajal
Using of xylanase and cold caustic extraction to remove hemicellulose from bagasse bleached pulp for dissolving pulp production [Volume 10, Issue 1, 2019, Pages 1-9]
-
Moradipour, Mehdi
The model of multiple criteria decision making to determine the optimal product and identify target markets based on poplar, alder and loblolly-pine [Volume 10, Issue 2, 2019, Pages 189-203]
-
Mostafalo, Atefeh
Effect of the addition of citric acid on particleboard properties [Volume 10, Issue 1, 2019, Pages 89-99]
N
-
Nazarnezhad, Nouredin
Investigation of resistance and optical properties of the papers treated with cellulose nanocrystals and zinc oxide nanoparticles [Volume 10, Issue 3, 2019, Pages 407-415]
-
Nazerian, Morteza
The effect of dimensional changes of flange and web in I-joist on its bending strength [Volume 10, Issue 4, 2020, Pages 507-520]
-
Nejati, Vahid
The effect of kaolinite on the properties of lignocellulose superabsorbent from old corrugated container fiber fines [Volume 10, Issue 4, 2020, Pages 531-542]
O
-
OMRANI, PANTEA
Investigating the stress carrying capacity of miter corner joints made with biscuit under diagonal tension and compression loading [Volume 10, Issue 3, 2019, Pages 323-336]
-
OMRANI, PANTEA
Investigation of performance and fracture monitoring of dowel-welded joint by micrographs of scanning electron microscopy [Volume 10, Issue 4, 2020, Pages 589-603]
R
-
Rafighi, Ali
The impact of different factors on particles quality and energy consumption in knife ring flaker [Volume 10, Issue 2, 2019, Pages 205-215]
-
Rahmaninia, Mehdi
Effect of cationic polyDADMAC-based fixing agent on strength properties of OCC pulp [Volume 10, Issue 4, 2020, Pages 605-616]
-
Rasooly Garmaroody, Esmaeil
Effect of structural characteristics of process water on paper properties made from recycled fiber [Volume 10, Issue 3, 2019, Pages 337-346]
-
Rasouli, Davood
Fabrication and properties evaluation of three layered transparent nanocomposite reinforced with cellulose and chitin nanofibers [Volume 10, Issue 4, 2020, Pages 495-505]
-
Rasouli, Davood
Improving Weathering Performance of Beech Wood Coated with Acrylic Paint by nano zinc oxide and nano cellulose [Volume 10, Issue 2, 2019, Pages 311-321]
-
Resalati, Hosain
Application of nano-titanium dioxide in the manufacture of Photocatalyst Securities Paper by controlled hydrolysis method [Volume 10, Issue 1, 2019, Pages 21-34]
-
Resalati, Hosain
Effect of calendering on physical and mechanical properties of coated papers [Volume 10, Issue 2, 2019, Pages 273-285]
-
Resalati, Hosain
Effect of structural characteristics of process water on paper properties made from recycled fiber [Volume 10, Issue 3, 2019, Pages 337-346]
-
Resalati, Hosain
The product of pulp from hornbeam with alkaline sulfite- AQ process [Volume 10, Issue 4, 2020, Pages 479-494]
-
Resalati, Hossein
Identification and Evaluation of characteristics of Fractions of Industrial Softwood Kraft Lignin Separated by Single Step Fractionation [Volume 10, Issue 2, 2019, Pages 297-309]
-
Rezaian, Alireza
The effect of dimensional changes of flange and web in I-joist on its bending strength [Volume 10, Issue 4, 2020, Pages 507-520]
-
Rezayati Charani, Pejman
The Effect of Protexin Enzyme for Bagasse Storage on Pulp and Paper Properties [Volume 10, Issue 3, 2019, Pages 457-468]
-
Rostampour haftkhani, akbar
Experimental study on flexural performance of poplar glued-laminated timber constructed by mechanical fastener and comparing them with those made with cold press [Volume 10, Issue 3, 2019, Pages 347-360]
-
Rudi, Hamidreza
Effect of alum-dispersed rosin system on water absorption, strength and optical properties of papers made from recycled fibers [Volume 10, Issue 3, 2019, Pages 385-395]
S
-
Sadeghi Fard, Amir Hosien
Effect of poly lactic acid on physical and mechanical properties of wood plastic composite [Volume 10, Issue 2, 2019, Pages 261-272]
-
Sam Daliri, Mostafa
Effect of press closing speed on stress relaxation and set recovery of densified alder wood [Volume 10, Issue 4, 2020, Pages 469-477]
-
Samiee Kootenaee, mehdi
Effect of structural characteristics of process water on paper properties made from recycled fiber [Volume 10, Issue 3, 2019, Pages 337-346]
-
Saraeian, Ahmadreza
Identification and Evaluation of characteristics of Fractions of Industrial Softwood Kraft Lignin Separated by Single Step Fractionation [Volume 10, Issue 2, 2019, Pages 297-309]
-
Savari, Ahmad
The Effect of Protexin Enzyme for Bagasse Storage on Pulp and Paper Properties [Volume 10, Issue 3, 2019, Pages 457-468]
-
Scholz, Frieder
The impact of different factors on particles quality and energy consumption in knife ring flaker [Volume 10, Issue 2, 2019, Pages 205-215]
-
Seyednaseredin, Masoumeh
The influence of hot water pre-extraction of wheat straw hemicelluloses on monoethanolamine-AQ and soda-AQ pulp properties [Volume 10, Issue 3, 2019, Pages 361-372]
-
Shaabani, Reza
Effect of press closing speed on stress relaxation and set recovery of densified alder wood [Volume 10, Issue 4, 2020, Pages 469-477]
-
Shahraki, Afsaneh
Effect of poly lactic acid on physical and mechanical properties of wood plastic composite [Volume 10, Issue 2, 2019, Pages 261-272]
-
Shahreki, Afsaneh
Effects of cellulose nano crystal addition on the properties of polyhydroxybutyrate-co-valerate (PHBV) films [Volume 10, Issue 1, 2019, Pages 153-164]
-
Shakhes, Jalal
Chemical treatment of Bagasse by oxalic acid-choline chloride and lactic acid-choline chloride deep eutectic solvents [Volume 10, Issue 4, 2020, Pages 559-573]
-
Shamsian, Mohammad
The effect of dimensional changes of flange and web in I-joist on its bending strength [Volume 10, Issue 4, 2020, Pages 507-520]
-
Shokri, Shokoofeh
Investigation on pulp production using γ-valerolactone organosolv process from birch wood [Volume 10, Issue 3, 2019, Pages 429-443]
-
Sixta, Herbert
Using of xylanase and cold caustic extraction to remove hemicellulose from bagasse bleached pulp for dissolving pulp production [Volume 10, Issue 1, 2019, Pages 1-9]
-
Sixta, Herbert
Investigation on pulp production using γ-valerolactone organosolv process from birch wood [Volume 10, Issue 3, 2019, Pages 429-443]
T
-
Taheri, Zohreh
Effect of alum-dispersed rosin system on water absorption, strength and optical properties of papers made from recycled fibers [Volume 10, Issue 3, 2019, Pages 385-395]
-
Tatari, ali asghar
Investigate of Biometric andChemical Properties of Ammodendron persicum Fibers (Case Study; Zirkouh area - Qaenat City, South Khorasan, Iran) [Volume 10, Issue 1, 2019, Pages 49-62]
V
-
Vatankhah, Elham
The effect of residual xylan on cellulose nanofiber production through electrospinning of wheat straw [Volume 10, Issue 4, 2020, Pages 543-558]
Y
-
Yahyaei, seyed Mohammad Hossein
Effect of press closing speed on stress relaxation and set recovery of densified alder wood [Volume 10, Issue 4, 2020, Pages 469-477]
-
Yari Firouzabadi, Zahra
The effect of nano graphene particles on the Physical and mechanical of high density polyethylene-rapeseed stalk flour composites [Volume 10, Issue 4, 2020, Pages 629-641]
-
Yousefi, Hossein
Improving Weathering Performance of Beech Wood Coated with Acrylic Paint by nano zinc oxide and nano cellulose [Volume 10, Issue 2, 2019, Pages 311-321]
Your query does not match with any item